Finisar FTLX1471D3BCV 1310nm 10km Single Mode LC Optical Transceiver

Finisar's FTLX1471D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links up to 10km over single-mode fiber- да. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-LR/LW and 1000BASE-LX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. This product is for applications specifically designed for 10G SFP+ ports and 1G/10G SFP+ ports and not native 1G SFP ports. The FTLX1471D3BCV is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.

Краткие технические характеристики

Особенности сайта

• Hot-pluggable SFP+ footprint

• Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates

• Power dissipation < 1W

• RoHS-6 compliant (lead-free)

• Commercial temperature range -5°C to 70°C

• однократный источник питания 3.3V

• Maximum link length of 10km

• Uncooled 1310nm DFB laser

• Receiver limiting electrical interface

• Duplex LC connector

• Built-in digital diagnostic functions

Figure 1 shows the appearance of FTLX1471D3BCV.

Получить больше информации

Do you have any question about the FTLX1471D3BCV?

Свяжитесь с нами сейчас via [email protected].